The new Soilmec STM20 is our latest lorry mounted piling rig. Purchased primarily to supplement our extensive highways capability, the STM20 is also a low cost solution for smaller rotary jobs and projects requiring preliminary piling.
The rig is mounted on a 6 wheel Volvo chassis and is the first in the UK to comply with Euro 6 and London LEZ emissions standards. Depending on ground conditions and Kelly bar installed it can dig up to 30m, and maximum diameter 105omm.
It’s self erecting mast allows the rig to transfer from transport mode to fully rigged inside 20 minutes. This provides an effective solution for any highways project, particularly Smart Highways schemes with long distances between pile locations to be accessed via the existing carriageway.
It is capable of operating through 270 degrees around it’s undercarriage, with a typical operating width 4.3m and mast height of 19m.
For full details download our datasheet in PDF format.
|Dimensions||3.7m x 9.9m operating footprint
19m mast height
10.4m x 2.5m transport mode
|Engine||Cummins QSB 4.5
160 BHP @ 2200 rpm
Tier 3 emissions compliant
|Track Pressures||Q1 = 290kPa (on 800mm pads)
Q2 = 315kPa (on 800mm pads)
Track pressures for use as guide only, full details available on request.
|Attributes||Rapid mobilising rotary piling rig. Quiet, lightweight and powerful.|